Polycom SoundStructure C16 Design Manual page 15

● Event engine for using internal state information such as muting, logic input and logic output ports,
and an IR remote for controlling SoundStructure
SoundStructure devices are configured with Polycom's SoundStructure Studio software, a Windows
comprehensive design tool used to create audio configurations either online—connected to a
SoundStructure system—or offline—not connected to a SoundStructure system. SoundStructure Studio is
used to upload and retrieve configuration files to and from SoundStructure systems.
For detailed information on how to install a device, terminate cables, and connect other devices to the
SoundStructure devices, refer to the
SoundStructure API command syntax used to configure SoundStructure devices and control the devices
with third party controllers, refer to
Command Protocol Reference Guide can also be found by pointing a browser to the SoundStructure
device's IP address.
This guide is designed for the technical user and A/V designer who needs to use SoundStructure products,
create audio designs, customize audio designs, and verify the performance of SoundStructure designs. This
guide is organized as follows:
●
Introducing the Polycom SoundStructure Product Family
products including the OBAM
outputs, telephony, and submix processing.
●
Introducing SoundStructure Design Concepts
physical channels, virtual channels, and virtual channel groups. These concepts are integral to
making SoundStructure products easy to use and enable control system application code to be
reused and portable across multiple installations.
●
Creating Designs with SoundStructure Studio
windows software to create a design. Start with this section if you want to get up and running quickly
using SoundStructure Studio.
●
Customizing SoundStructure Designs
created with SoundStructure Studio including all the controls presented as part of the user interface.
Start with this chapter if you have a design and would like to customize it for your application.
●
Connecting Over Conference Link2
SoundStructure devices integrate with the Polycom Video Codec conferencing system.
●
Linking Multiple SoundStructure Devices with One Big Audio Matrix
link multiple SoundStructure devices with the OBAM™ interface.
●
Installing SoundStructure Devices
validate the performance of the SoundStructure devices. Start here if you have a system already up
and running and would like to adjust the system in real-time.
●
Using Events, Logic, and IR
input and output pins, an IR remote, and for options for how to send commands from
SoundStructure's RS-232 interface to other devices including a Polycom Video Codec.
●
Managing SoundStructure Systems
to set IP addresses and how to view the internal SoundStructure logs, and more.
●
Using the Polycom
pairing and using the Polycom RealPresence Touch device with a SoundStructure system.
●
Integrating the Polycom
the Polycom Touch Control with a SoundStructure system. See the SoundStructure and the Polycom
Touch Control Users Guide for instructions on how to use the Polycom Touch Control with
SoundStructure.
Polycom, Inc.
SoundStructure Hardware Installation
Appendix A: Command Protocol Reference
™
architecture and details of the signal processing available for inputs,
provides detailed information on customizing the design
provides information on the Conference Link2 interface and how
provides information on how to install, set signal levels, and
provides information on how to use SoundStructure 'events' with logic
provides information for the network administrator including how
®
RealPresence Touch
®
Touch Control with SoundStructure Systems
is an introduction to the SoundStructure
presents the SoundStructure design concepts of
describes how to use the SoundStructure Studio
™
with a SoundStructure System
Guide. For information on the
Guide. The SoundStructure
provides information on how to
provides the steps for
provides the steps for using
®
-based
15