Upgrading An Existing Tel1/Tel2 Project To The Soundstructure Voip Interface - Polycom SoundStructure C16 Design Manual

Upgrading an Existing TEL1/TEL2 Project to the SoundStructure VoIP
Interface
Polycom recommends upgrading telephony cards in a SoundStructure system by working offline with the
project file and running the Upgrade Plugin Card Tool with the offline project.
Starting with an Online System
While SoundStructure Studio supports upgrading an online system, Polycom recommends that you get the
configuration file from your system and then disconnect from the system and continue to work offline to
reduce the number of steps and simplify the upgrade process.
To get the configuration file, select the Connect menu option in SoundStructure Studio and select the
Search for Devices option to find the desired system from the list of discovered systems. If your system is
not discovered, enter the IP address of the system or choose a system from the address book. Once the
system is identified, select the Get configuration from devices option and select Connect as shown in
the following figure.
Connecting to SoundStructure Devices
Polycom, Inc. 309