Controlling The System; Creating A Room Combining Application Conferencing System - Polycom SoundStructure C16 Design Manual

Controlling The System

The system can be controlled in the same manner as the previous examples. The microphones may be
muted and unmuted with the following mute commands.
set mute "Mics" 1
set mute "Mics" 0
The in-room volume for the remote audio may be increased with the fader command on the phone or video
codec audio as follows.
inc fader "VSX8000 In" 1
inc fader "Phone In" 1
to increase the gain on the faders - making the "VSX8000 In" and "Phone In" channels louder in the local
room.
Creating a Room Combining Application Conferencing
System
This example shows how to use the SoundStructure products for a room combining application. This
example assumes there are two rooms, each with a PSTN line, a program audio feed, a loudspeaker zone,
and one digital microphone array in each room. In addition, room 1 also has a Polycom HDX video
conferencing system that is used with all microphones when the rooms are combined and only in room 1
when the rooms are split.
Polycom, Inc. 488