Polycom SoundStructure C16 Design Manual page 666

Signal Generator Sweep Step
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
Values continuous : Continuous (default)
1/24 : 1/24 Octave
1/12 : 1/12 Octave
1/6 : 1/6 Octave
1/3 : 1/3 Octave
1 : 1 Octave
Event Source No
Description
When the signal generator's sig_gen_type is set to sweep, this parameter sets the step size of the sweep
generator. This signal generator can sweep continuously, in fractional octave steps, or in full octave steps.
Signal Generator Sweep Stop
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
System Limits Minimum: 20.0, Maximum: 20000.0, Resolution: 0.1
Default 20000.0
User Limits No
Supported
Event Source No
Polycom, Inc.
Size—sig_gen_sweep_step
Frequency—sig_gen_sweep_stop
666