Viewing Push And Hold To Temporarily Mute A Microphone - Polycom SoundStructure C16 Design Manual

Viewing Push and Hold to Temporarily Mute A Microphone

In this example, a cough button is created to allow someone to mute their particular microphone while they
are holding the button closed.
This example assumes that the microphone is already part of the system and now the logic inputs and
outputs will be manually added to the existing system. If this is a new system, then use the logic input and
logic output modes on the edit channels control to automatically add the logic inputs and outputs and
associated events when the microphone input is defined.
Step 1: Add the logic input button.
Use the edit logic button to add a digital logic input.
As with other examples, check the wiring page to confirm that the logic input is on the desired logic input pin.
Polycom, Inc. 260