microphone is sent to the VSX8000 and the VSX8000 is sent to the local amplifier. The signal generator is
muted.
Matrix Page
Understanding Wiring Information
The system should be cabled according to the layout on the wiring page as shown in the following figure.
To wire the system with virtual channels on different physical inputs or outputs, drag the channels to their
desired physical inputs or outputs and then cable the system according to the updated wiring information.
In this example, Table Mic 1 is connected to physical input 1, the VSX8000 In channel is connected to
physical input 2, the VSX8000 Out channel is connected to physical output 1 and the Amplifier channel is
Polycom, Inc.
406