Polycom SoundStructure C16 Design Manual page 562

Examples
Command
set phantom "Table
Mic 1" 1
Safety Mute—safety_mute
Argument Argument value
Channel Type Global System
Value Type Boolean
Read/Write Mode Read/Write
Default 0
Event Source Yes
Description
This parameter sets the status of the safety mute. If safety mute is enabled (1), all line outputs of all the
devices are muted.
Examples
Command
set safety_mute 1
set safety_mute 0
Polycom, Inc.
Response
val phantom "Table
Mic 1" 1
Response
val safety_mute 1
val safety_mute 0
Description
Enables the 48V phantom power supply for the input channel
"Table Mic 1".
Description
Enables the safety_mute for a SoundStructure system.
Turns off the safety_mute for a SoundStructure system.
562