Upgrading Software With An Existing Provisioning Server - Polycom SoundStructure C16 Design Manual

Note: Turning off Windows Firewall to Run a FTP Server
To run the FTP server on your local PC, you will either have to temporarily turn off
your Windows Firewall or open port 21 to allow FTP traffic to your PC. If you do not
allow traffic through your Windows Firewall, your SoundStructure VoIP Interface will
not be able to reach your PC's FTP server and you will not be able to update the
software on your SoundStructure VoIP Interface. After the software has been
updated, you can turn your firewall back on or close any ports you opened.
Downloading and installing an FTP server
A free and popular server, Filezilla Server, is available for Windows at http://filezilla-project.org. This
application (version 0.9.xx) has been tested with the UC Software.
To set up the FTP server:
1 Download and install the latest version of Filezilla Server. For example, visit
http://filezilla-project.org/.
2 After installation, a 'Connect to Server' dialog with display. Select OK to open the administrative
user interface.
3 To configure a user, select Edit > Users in the status bar.
4 Select Add.
5 Enter the user name for the phone, for example, bill123, and select OK.
6 Select the Password check box and enter a password, for example, 1234. The phone will use this
password to log in.
7 Select Page >Shared folders to specify the server-side directory where the provisioning files and/or
software files will be located (and the VoIP log files uploaded).
8 Select Add and pick the directory.
9 To allow the phone to upload logs onto the provisioning server, select the Shared Folders > Files
>Select Write and Delete check boxes, and then select Shared Folders > Files >Select Write and
Delete check boxes, and then select OK.
10 Determine the IP address of the FTP server by entering cmd in the Run dialog on your Start menu,
and ipconfig in the command prompt. The resulting text shows the IP Address of the FTP server.
Follow the steps in the next section to upgrade the software on the SoundStructure VoIP Interface once the
FTP server has been created. Use the username and password created above as the username and
password for the provisioning server settings.

Upgrading Software with an Existing Provisioning Server

To update the SoundStructure VoIP Interface software via an existing provisioning server, follow these
steps.
Polycom, Inc. 355