Wiring Information - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

By default the two AEC references have been set to the two mono amplifiers "Amplifier 1" and "Amplifier 2"

and is then shown to be in stereo mode.

Project Channels Page

Wiring Information

The system should be wired according to the information found in the wiring page and shown in the next

figure. To wire the system with virtual channels on other physical inputs or outputs, simply drag the channels

to their desired locations and then wire the system according to the modified wiring information.

Polycom, Inc.