Polycom SoundStructure C16 Design Manual page 605

Add Call to a Conference—voip_join
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
This parameter is used to add a call to the conference.
Select the Active
Argument Argument value
Channel Type Virtual Channel
Value Type Sequence
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
System Limits Minimum: 1, Maximum: 12
Event Source No
Description
This parameter selects the currently active line. Some parameters (e.g. phone_connect, phone_dial,
phone_redial) operate on the currently active line, as specified by this parameter. Setting this parameter is
analogous to selecting a line key on the UI of a Polycom VoIP phone.
Polycom, Inc.
Line—voip_line
l
l
605