Configuring Polycom Touch Control Regional Settings - Polycom SoundStructure C16 Design Manual

IP Address Settings
Setting
Subnet Mask
Default Gateway
4 Configure the following DNS settings:
DNS Setting
Setting
Domain Name
DNS Servers

Configuring Polycom Touch Control Regional Settings

To configure the Polycom Touch Control Regional settings:
1 From the Home screen, touch
2 Touch the Location tab.
3 Select a language from the Language drop-down menu.
4 Set the Date and Time information as described in the following table.
Time Information Settings
Setting
Time Zone
Time Server
Polycom, Inc.
Description
Displays the subnet mask currently assigned to the Polycom Touch Control. If
you selected Enter IP address manually, enter the subnet mask here.
Displays the gateway currently assigned to the Polycom Touch Control. If you
selected Enter IP address manually, enter the gateway IP address here
Description
Displays the domain name currently assigned to the Polycom Touch Control. If
the Polycom Touch Control does not automatically obtain a domain name,
enter one here.
Displays the DNS servers currently assigned to the Polycom Touch Control. If
the Polycom Touch Control does not automatically obtain a DNS server
address, enter up to two DNS servers here. You can specify IPv4 DNS server
addresses only when the IPv4 address is entered manually. When the IPv4
address is obtained automatically, the DNS Server addresses are also
obtained automatically.
.
Description
Specifies the time difference between GMT (Greenwich Mean Time) and your
location.
Specifies connection to a time server for automatic Touch Control time settings.
The date and time must be manually reset every time the Touch Control
restarts, in the following cases:
• Time Server is set to Off
• Time Server is set to Manual or Auto, but the Touch Control cannot connect
to a time server successfully.
292