Setting An Ip Address With Soundstructure Studio - Polycom SoundStructure C16 Design Manual

Setting an IP address with SoundStructure Studio

You can set the IP address and other Ethernet settings of the SoundStructure VoIP Interface via
SoundStructure Studio when connected to an online SoundStructure system. To set Ethernet settings use
the following steps:
1 Connect to the SoundStructure system with SoundStructure Studio and select the Wiring page
2 Left click on the desired SoundStructure device with the SoundStructure VoIP Interface device as
shown next. For SoundStructure system with only one device, the device is already selected.
3 Next click on the Edit Devices Settings portion of the wiring page and then click Edit Network
Settings as shown next.
Polycom, Inc. 349