Uploading The Configuration File - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Uploading the Configuration File

Now that the SoundStructure system has the appropriate plug-in cards installed, the upgraded project must

be sent to the SoundStructure system with the following steps:

1 Left-click on the System Name to select the upgraded configuration file that was created previously.

2 Connect to the SoundStructure system by selecting the Connect option and Search for Devices.

3 Select Send configuration to devices and then click Connect.

4 Confirm that you would like to send the configuration file to the system.

After sending the configuration file to the SoundStructure system, the resulting system will have a solid

green front panel LED to indicate that the configuration file that is loaded and matches the hardware, and

SoundStructure Studio project status will be solid green as shown next.

Green Status Indicator in SoundStructure Studio

The system is now ready for the final online setup required by the SoundStructure VoIP Interface to register

with the desired call platform.

Polycom, Inc.