Polycom SoundStructure C16 Design Manual page 170

When analog inputs are also used as part of the design, such as for a wireless microphone and program
audio in this example, the analog inputs that are used are allocated from the first analog input to the last
available input.
This allocation and assignment of analog inputs can be viewed from the wiring page as shown in the
following figure. Note that the particular microphone element associated with the labeling A, B, and C is
highlighted in green on the wiring page for each digital microphone input.
In this example, up to six analog inputs can be used (three analog inputs are presently in use) in addition to
the two Polycom ceiling microphones.
Analog Inputs and Polycom Ceiling Microphones on Wiring Page
The digital microphone array elements can be moved on the wiring page to different physical inputs if
desired by clicking and dragging the microphone to move it to a different physical input. The following figure
Polycom, Inc. 170