Polycom SoundStructure C16 Design Manual page 584

● 11: triplet
● 12: low trill precedence
● 13: ring splash
● 14: silent ring
Enable Ring Tones For Telephony
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Analog Telephony Input
Virt Chans Mono
Default 1
Event Source No
Description
This parameter enables or disables ring tone generation for the telephony interface. If ring tones are
enabled (1), then a ring tone is played whenever there is an incoming ring signal on the telephony interface.
Polycom, Inc.
Interface—phone_ring_tone_en
584