Editing Virtual Channels - Polycom SoundStructure C16 Design Manual

clicking Expand All or collapse the channels to only show the virtual channel groups by clicking Collapse
All, as shown in the following figure.
Editing Controls on the Channels Page in SoundStructure Studio
Note: Adjusting Virtual Channel Settings
Any of the settings for virtual channels can be adjusted by either adjusting the
virtual channels individually or by adjusting the virtual channel group settings.

Editing Virtual Channels

You can add or delete additional virtual channels by clicking Edit Channels on the Channels page as
highlighted in the following figure. You can adjust designs to add more inputs or outputs up to the limit of the
number of physical inputs and outputs of the hardware that was selected to implement the design.
Editing Channels on the Channels Page in SoundStructure Studio
The Edit Channels button opens the input and output channel selection window and enables you to add or
remove virtual channels, as shown in the following figure. If virtual channels are added, the channels display
on the Channels page with default gain settings for the devices and default signal routing created for the
matrix based on the type of signal added. If virtual channels are deleted, the channels are removed from
the Channels page and the channels' matrix signal routings are removed.
Polycom, Inc. 87