Polycom SoundStructure C16 Design Manual page 686

Examples
Command
set auth_password
"12345"
Clink2 Call Active
Argument Argument value
Channel Type Device-Specific System
Value Type Boolean
Read/Write Mode Read-Only
Event Source Yes
Description
This parameter gets the call active status of a Polycom Video Codec. This is true whenever the Polycom
Video Codec has an active video or PSTN call. A status message is generated whenever the call active
status is changed by a Polycom Video Codec.
Clink2 Local Call Active
Argument Argument value
Channel Type Device-Specific System
Value Type Integer
Read/Write Mode Read/Write
System Limits Minimum: 0, Maximum: 32
Default 0
User Limits No
Supported
Event Source Yes
Description
This parameter gets and sets the call active status that the device broadcasts to any connected Polycom
Video Codec and Polycom Microphone Arrays. This primarily controls the state of the green LED on the
Polycom Microphone Arrays. Whenever this parameter is a value greater than 0, the call active status sent
Polycom, Inc.
Response
val auth_password "****"
Status—clink_call_active
Status—clink_local_call_active
Description
Sets the authentication password to "12345". The
acknowledgment masks the password.
686