Polycom SoundStructure C16 Design Manual page 714

Adding systems to a folder
A SoundStructure system entry may be copied to a folder by clicking and dragging the system from the All
Entries area to the desired folder as shown in the following figure. The "+" symbol near the cursor indicates
the system is being copied to the folder.
Moving systems from one folder to another folder
A SoundStructure system may be moved from one folder to another folder by clicking and dragging the
system from the source folder to the target folder as shown in the following figure. In this example the system
from a source folder was clicked and dragged to move it into the London folder. There is no "+" symbol by
the cursor when systems are moved.
Copying systems from one folder to another folder
A SoundStructure system may be copied from one folder to another by holding the Control key and clicking
and dragging the system from the source folder to the target folder. The cursor will show a "+" symbol to
confirm that the system is being copied from one folder to another folder.
Polycom, Inc. 714