Editing Devices - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

output is plugged into output 6, no audio is heard on output 3 because the audio is being routed to physical

Note: Matching Physical Channel Wiring

For proper system operation, make sure the physical channel wiring matches the

wiring instructions on the Channel page. You can make adjustments to the wiring by

physically moving connections to match the Wiring page, or by moving signals on

the Wiring page to match the physical connections.

Editing Devices

When working offline, the Wiring Page includes an Edit Devices control for changing the underlying

SoundStructure equipment that was selected during the design process, as shown in the following figure.

Edit Devices in SoundStructure Studio

You can do the following with the Edit Devices control:

● Grow a project from a smaller SoundStructure device to a larger device

● Shrink a project from a larger SoundStructure device to a smaller device, if there are enough unused

inputs and outputs

● Add, change, or remove telephony cards

Polycom, Inc.