Polycom SoundStructure C16 Design Manual page 366

Hide thumbs Also See for SoundStructure C16:

Table of Contents

requires approximately 1 to 2 minutes to boot. When you perform a software update, the boot time will

SoundStructure VoIP Interface Booting Status

If you don't have a VoIP interface listed on your wiring page, even though you have a SoundStructure VoIP

Interface plugged in, ensure that your project includes a SoundStructure VoIP Interface as described in the

previous section. Check the Wiring page Configured Devices area to confirm you have a SoundStructure

VoIP Interface installed into one or more of your SoundStructure devices as shown in the Configured

Devices section shown next. If a SoundStructure VoIP Interface is installed in a multi-SoundStructure device

system, first select the SoundStructure devices that has the SoundStructure VoIP Interface installed to see

the VoIP interface info in the device information area.

After you've confirmed a SoundStructure VoIP Interface is part of the configured devices installed, check the

Edit Channels control to ensure you have a SoundStructure VoIP Interface designed into your project.

Polycom, Inc.

Troubleshooting