Polycom SoundStructure C16 Design Manual page 692

remote used channel ID 3. This can be changed by following the instructions in the
for Polycom HDX System's.
RS-232 Baud Rate—ser_baud
Argument Argument value
Channel Type Device-Specific System
Value Type List
Read/Write Mode Read/Write
Values 9600 : 9600 bits per second (default)
19200 : 19200 bits per second
38400 : 38400 bits per second
57600 : 57600 bits per second
115200 : 115200 bits per second
Event Source No
Description
This parameter sets the baud rate for the RS-232 port. Hardware flow control should be enabled for baud
rates over 9600 bps (see the ser_flow parameter).
Examples
Command
set ser_baud 1 9600
Polycom, Inc.
Response
val ser_baud 1 9600
Description
Sets the serial port baud rate on device 1 (the first
device) to 9600.
Administrator's Guide
692