There is a wiring report that can be created by clicking Save Report on the wiring page as shown in the
following figure.
Saving Wiring Reports
The wiring report for this system is shown next.
SoundStructure system: SoundStructure System
C12 (bus id: 1)
C-Series Mic Input
1: Table Mic 1
2: Table Mic 2
3: Table Mic 3
4: Table Mic 4
5: Table Mic 5
6: Table Mic 6
7: Table Mic 7
8: Table Mic 8
9: Program Audio
10: VSX8000 In
C-Series Line Output
1: VSX8000 Out
2: Amplifier
Plugin Card: Single Line Telephone
1: Phone In, Phone Out
Once the signal wiring is completed, the next step is to upload the settings to the device.
Uploading A Configuration File
Configuration files are uploaded to a SoundStructure device or downloaded from a SoundStructure device
by using the SoundStructure Studio software.
Polycom, Inc.
205