Polycom SoundStructure C16 Design Manual page 582

Reject an Incoming
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans Analog Telephony Output, VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
Setting this parameter causes the incoming call to be rejected. For the SoundStructure VoIP Interface, the
call is rejected and immediately sent to voice-mail. For the PSTN interface, the call is terminated by
automatically answering it, then immediately hanging up. The audio paths remain muted so that the
conference is not interrupted and so that no local conference audio is sent to the incoming caller.
Ring Indicator For Telephony
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read-Only
Phys Chans Analog Telephony Input, VoIP Telephony Input
Virt Chans Mono
Event Source Yes
Description
This parameter indicates the ringing state for the telephony interface. While the telephony interface is
ringing, reading this parameter will return 1. When the telephony interface is not ringing, reading this
parameter will return 0.
Acknowledgements for this parameter will be automatically sent whenever this parameter changes state
due to a hook flash, auto-answer, or auto-hangup.
Polycom, Inc.
Call—phone_reject
Interface—phone_ring
582