Processing Output Dynamics; Processing Output Equalization - Polycom SoundStructure C16 Design Manual

Note: Submix Signal Delay
Routing a signal to a submix adds 1.5 milliseconds of delay to the signal.
The submix processing flow is shown in the following figure along with the location of the submix signal level
meter. The gain on the submix can be adjusted with the fader control.
Submix Processing Flow and Submix Signal Level Meter
Submix Processing
Submix Input
Dynamics
from Matrix
Processing

Processing Output Dynamics

The output dynamics processing available on the outputs is the same as the input dynamics processing and
is described in the Using Dynamics Processors

Processing Output Equalization

As shown in the following figure, the equalization processing that is available for each submix consists of a
dedicated list of the following:
● Low Pass
● High Pass
● Low Shelf
● High Shelf
Polycom, Inc.
Parametric
Fader
Equalization
Mute
Submix output
Delay
to Matrix
level_post
section.
132