Using The Soundstructure Voip Interface With Soundstructure Studio; Using The Phone Settings Control - Polycom SoundStructure C16 Design Manual

An example configuration to register a line as extension 1029 to a call server at 172.22.2.203 will look like
the figure shown next. Your settings will depend on the particular values required for your installation.
Registering aLine to the Call Server
Using the SoundStructure VoIP Interface with
SoundStructure Studio
As described in earlier sections, you can use SoundStructure Studio to configure the network settings of the
SoundStructure VoIP Interface. You can then use either a provisioning server or the Web Configuration
Utility to set up the VoIP-specific parameters.
In addition to its use in setting up the system, SoundStructure Studio can also help with understanding how
to control the SoundStructure VoIP Interface and to test the system by making audio calls.

Using the Phone Settings Control

You can use the phone settings control on the Channels Page in SoundStructure Studio to dial new calls,
transfer calls, put calls on hold, join calls and split calls.
The user interface within SoundStructure Studio has been designed to look like the user interface of the
SoundPoint IP phones with a dial keypad, line keys, and phone soft keys for initiating and managing calls
as shown in the following figure. In addition, there are telephony settings for customizing auto-answer mode
Polycom, Inc. 344