Controlling The System - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

available for the program audio sources. The amplifier outputs for Room 1 and Room 2 are set to outputs 1

and 2 respectively.

Project Wiring Information

Controlling The System

The system can be controlled in the same manner as the previous examples. The microphones in the

combined configuration may be muted and unmuted with the following mute commands.

set mute "Mics" 1

set mute "Mics" 0

The in-room volume for the remote audio may be increased with the fader command on the phone or video

codec audio as follows.

inc fader "HDX Video Call In" 1

inc fader "Phone In 1" 1

Polycom, Inc.