Polycom SoundStructure C16 Design Manual page 711

Once the system name has been added, you may either press Tab to go to the IP address field or single left
click on the Address field associated with the system name and type in an IP address. A comment may be
added by either hitting Tab or single left clicking on the comment field.
After an entry has been created, the address book will appears as in the following figure.
Adding Connected Systems to the Address Book
Once SoundStructure Studio is connected to a system, the system may be added to the address book by
right clicking on the system name as shown in the following figure.
Polycom, Inc. 711