Creating Virtual Channel Groups - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

The Edit Channels Page in SoundStructure Studio

There is a graphic symbol, see the following figure, at the top of each virtual channel as a reminder of

whether the virtual channel is a monaural or stereo virtual channel.

Monaural and Stereo Virtual Channel Symbols

This graphic symbol is also shown on the Edit Channels page associated with each channel in the

'Channels Defined:' column.

Creating Virtual Channel Groups

Virtual channel groups are collections of virtual channels that you can configure together. When creating a

new project, a virtual channel group called "Mics" is automatically created and includes all the microphone

inputs for the design. The virtual channel group can be used to adjust all the settings for all the signals in

the virtual group regardless of whether the group is expanded or contracted.

A virtual channel group may be collapsed or expanded by clicking the

graphics respectively, on

the top of the group page. All groups in the channels page can be expanded or collapsed by clicking on the

Expand or Collapse buttons respectively.

Polycom, Inc.