Soundstructure Voip Interface Settings On The Wiring Page - Polycom SoundStructure C16 Design Manual

Telephony Settings
Name
Tone Gain
Do Not Disturb

SoundStructure VoIP Interface Settings on the Wiring Page

The wiring page has several options for configuring the SoundStructure VoIP Interface that are active only
when connected online with a SoundStructure system that has a SoundStructure VoIP Interface.
SoundStructure VoIP Interface Settings
Wiring Page Options
Button Name
Edit Network Settings
Web Configuration
Local Configuration
Reset
Factory Reset
Polycom, Inc.
Possible Values
-20 to +20 dB. Default is
0.
Enable or
Disable (default)
Description
Opens the VoIP Network Settings user interface control for manually configuring the
Ethernet settings for the SoundStructure VoIP Interface.
Launches the default browser with the IP address of the SoundStructure VoIP Interface.
Resets to default values the auto answer, entry and exit tones, Do Not Disturb, and
ringtone selection settings in the Telephony Settings. You will be prompted to the
confirm after selecting this option.
Resets the SoundStructure VoIP Interface to its factory default settings. This will clear all
Ethernet settings, provisioning server settings, line registrations, and all other
VoIP-specific parameters. You will be prompted to confirm after selecting this option.
Before using this option you may want to use the Utilities > Phone Backup and Restore
options from the Web Configuration Utility to save the VoIP-specific settings.
Description
Sets the level of the entry and exit tones.
Determines whether the entire SoundStructure VoIP
Interface is in Do Not Disturb mode. This setting will affect all
line registrations and is not adjustable on a per line basis.
348