Polycom SoundStructure C16 Design Manual page 331

Ethernet Settings Page
The General fields are described in the following table.
General Settings
Name Possible Values
DHCP Enable (default) or
Disable
IP Address Dotted-decimal IP
address
Subnet Mask Dotted-decimal subnet
mask
IP Gateway Dotted-decimal IP
address
DNS Server Dotted-decimal IP
address
DNS Alternate Dotted-decimal IP
Server address
DNS Domain Domain name string
Polycom, Inc.
Description
If disabled, you must enter the rest of the IP parameters in order
to have a valid IP address.
Enter the IP address to be used for the SoundStructure VoIP
Interface. This IP address should be unique to the
SoundStructure VoIP Interface. If DHCP is enabled, this setting
will be grayed out.
Enter the subnet netmask to be used with the IP address.
Typically this is equal to 255.255.255.0. If DHCP is enabled, this
setting will be grayed out.
Enter the IP address of the router that is the address the
SoundStructure VoIP Interface will go to when seeking IP
addresses outside of the local subnet.
Enter the IP address of the primary domain name server.
Enter the IP address of the secondary domain name server.
The phone's Domain Name System
331