Polycom Ir Remote - Polycom SoundStructure C16 Design Manual

Logic Input Mode Events
Push-to-mute
Push-to-talk
Depending on the logic output mode, there are additional events that are generated as summarized in the
table below.
Generated Logic Output Mode Events
Logic Output Mode
Activate on Mute
Activate on Unmute
Activate on Gate

Polycom IR Remote

In stand-alone SoundStructure applications without an
used to control SoundStructure devices that have both version 1.3 firmware and an external IR remote
Polycom, Inc.
Table Mic Button Event
Table Mic Button Event
Event Name
Table Mic LED Event
Table Mic LED Event
Table Mic LED Event
This event maps the value of the digital_gpio_state of
the button inversely to the mute state of the microphone.
While the microphone switch is closed
(digital_gpio_state=0), the microphone is muted
(mute=1). While the microphone switch is open
(digital_gpio_state=1), the microphone is muted
(mute=0).
This event maps the value of the digital_gpio_state of
the button directly to the mute state of the microphone. While
the microphone switch is closed
(digital_gpio_state=0), the microphone is unmuted
(mute=0). While the microphone switch is open
(digital_gpio_state=1), the microphone is muted
(mute=1).
Description
This event maps the mute state of the microphone directly to
the digital_gpio_state of the LED. If the microphone is muted
(mute=1) then the LED is turned on (digital_gpio_state=1).
This event maps the mute state of the microphone inversely
to the digital_gpio_state of the LED. If the microphone is
muted (mute=1) then the LED is turned off
(digital_gpio_state=0. If the microphone is unmuted
(mute=0) then the LED is turned on (digital_gpio_state=1).
This event maps the gate state (am_gate parameter) directly
to the digital_gpio_state of the LED. If the microphone gates
on (am_gate=1), the LED is turned on (digital_gpio_state=1).
If the microphone gates off (am_gate=0), the LED is turned
off (digital_gpio_state=0).
Polycom Video Codec
, the Polycom IR remote can be
242