Configuring Security Options; Setting Up Polycom Touch Control Log Management; Updating Polycom Touch Control Software - Polycom SoundStructure C16 Design Manual

Time Information Settings
Setting
Time Server Address
Time Format

Configuring Security Options

Configuring Admin ID and Password for Polycom Touch Control device
It is possible to set an Admin ID and password, which limits access to the Polycom Touch Control
Administration settings.
1 From the Home screen touch
2 Touch the Security tab.
3 Set the following security settings:
Security Setting
Setting
Admin ID
Admin Password

Setting up Polycom Touch Control log management

It is possible to transfer the Polycom Touch Control logs to an external USB storage device.
To configure Polycom Touch Control log management:
1 Ensure that a USB device is connected to the USB port on the right side of the Polycom Touch
Control device.
2 From the Home screen touch
3 Under Log Management, select Transfer Touch Control Logs to USB Device.

Updating Polycom Touch Control Software

Software updates may be received for the Polycom Touch Control device from the online software server
hosted by Polycom or from a USB storage device that you connect to the side of the Polycom Touch
Control device.
Polycom, Inc.
Description
Specifies the address of the time server to use when Time Server is set to
Manual.
Specifies your format preference for the time display and lets you enter your
local time.
.
Description
Specifies the ID for the administrator account. The default Admin ID is "admin".
Specifies the password for administrator access when logging in to the
Polycom Touch Control. When this password is set, you must enter it to
configure the Polycom Touch Control Admin Settings. The password must not
contain spaces. The default password is "456".
.
293