The block diagram of this system is shown in the next figure. The channel names are labeled with the virtual
channel names that are created by default by the SoundStructure Studio software.
Block Diagram for Conferencing Room
Table Mic 1
Table Mic 2
Table Mic 3
Table Mic 4
Table Mic 5
Table Mic 6
Table Mic 7
Table Mic 8
Program Audio (L)
Program Audio (R)
Phone 1 In
Phone 2 In
To create this design, start the SoundStructure Studio software and follow the steps shown in the next
section.
SoundStructure Studio Steps
The steps to create this project are shown in the following figures. The names for the channels are the
default names created by SoundStructure Studio, although the virtual channel names could be set to any
valid text string.
Polycom, Inc.
SoundStructure
C12 and TEL2
Amplifier 1
Amplifier 2
Phone 1 Out
Phone 2 Out
432