Polycom SoundStructure C16 Design Manual page 298

Hide thumbs Also See for SoundStructure C16:

Table of Contents

mechanism, such as through SoundStructure Studio or a Control System, adjusts the volume setting on the

Polycom Touch Control. This event may be customized to support different channels. "Amplifier" is the name

used by default.

_SST to Polycom Video Codec Amplifier Event

_SST to Polycom Video Codec volume

Maps "Amplifier" fader to Volume

SoundStructure

_Clink to Mics Mute

The '_Clink to Mics Mute' event maps the mute status from the Polycom Touch Control to the mute of the

virtual channel group "Mics". Muting or unmuting the system via the Polycom Touch Control maps that same

mute state to the channel or group called "Mics". "Mics" is the name used by default.

_SST to Polycom Video Codec Mic Mute Event

_Clink to Mics Mute

Maps Mute to "Mics" mute

SoundStructure

_Table Mic A Mute Event, _Table Mic B Mute Event, _Table Mic C Mute Event, ...

These events map the individual microphone mute status from push to talk microphones or Codec micro-

phones to the clink_mute parameter that is used to set the mute state of the system. Muting any of the

individual microphones will set clink_mute to 1 which will then mute all microphones due to the _Clink to

Mics Mute event which then causes the Polycom Touch Control to show that the system is muted.

Polycom, Inc.

Troubleshooting