Controlling The System - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Project Wiring Information

Controlling The System

A control system will typically be used to mute microphones and volume settings. The following sections

describe how this may be done with the command syntax of the SoundStructure devices. See Appendix A

- Command Protocol Reference Guide for additional information on the command set.

The microphones in the system may be muted either individually or as the "Mics" group by sending the

following API command to the SoundStructure device:

set mute "Mics" 1

will mute all the microphones in the system and

set mute "Mics" 0

will unmute the microphones in the system.

When connected to the Polycom HDX system, the microphones on the SoundStructure by muting the

microphones on the Polycom HDX system. As described in

Connecting Over Conference

Link2, the HDX

Polycom, Inc.