Wiring Information - Polycom SoundStructure C16 Design Manual

Power on Preset Settings

Wiring Information

The system should be wired according to the information found in the wiring page and shown in the following
figure. To wire the system with virtual channels on other physical inputs or outputs, simply drag the channels
to their desired locations and then wire the system according to the modified wiring information.
In this example, a single C8 device was used to implement the design. This device is wired as shown in the
following figure. The digital microphone arrays use the processing from inputs 3 - 8, leaving inputs 1 and 2
Polycom, Inc. 503