Polycom SoundStructure C16 Design Manual page 601

Set Dial Mode —voip_dial_mode
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Output
Virt Chans Mono
Values number : Number (digit) dialing (default)
url : SIP URL dialing
Event Source No
Description
This parameter is used to select between number dialing and SIP URL dialing. Whenever the
phone_connect parameter for a voip_out channel changes from 1 to 0, the voip_dial_mode parameter shall
be reset back to number. An automatic status message shall be generated when this happens.
Enable or Disable Do-Not-Disturb
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Output
Virt Chans Mono
Default 0
Event Source No
Description
This parameter enables (1) or disables (0) do-not-disturb mode on the VoIP plug-in card.
Polycom, Inc.
Mode—voip_dnd l
601