Polycom SoundStructure C16 Design Manual page 342

Identification Settings
Name Possible Values
Label Any string up to 256
characters
Type Private or Shared
Third Party Name Any string up to 256
characters
Number of Line From 1 to 65536
Keys
Calls Per Line From 0 to 24
Ring Type 1 Default
2 Silent Ring
3 Low Trill
4 Low Double Trill
5 Medium Trill
6 High Trill
7 High Double Trill
8 Highest Trill
9 Highest Double Trill
10 Beeble
11 Triplet
12 Ringback-style
13 Low Trill
14 Ring Splash
Configuring a Call Server
To configure the primary call server, continue to the Server 1 settings and enter the appropriate parameters
as described in the following table.
Polycom, Inc.
Description
Enter the text that will display next to the associated line key. If a
label isn't defined, the label will be derived from the user part of
the address.
Choose Private or Shared line identification. If set to Private,
standard call signaling is used. If set to Shared, call state
subscriptions and notifications are shared with multiple phones.
The default is Private.
Enter the line identification number you want to use for this
Bridged Line Appearance (BLA). This field is available only for
BLA registration. You must set Type to Shared to register a BLA
line.
The number of line keys that will be associated with this line
registration. The default is 1.
The number of calls which may be active or on hold for each line
key associated with this line registration.
Choose a specific ringtone to identify calls to this line.
Precedence
342