Pair a Previously Paired SoundStructure System with a RealPresence Touch
You can select a previously paired SoundStructure system from a list to pair it again.
To pair a previously paired SoundStructure system with a RealPresence Touch:
1 From the Home screen, tap Settings > Administration and enter your Admin ID and password (if
authenticated pairing is configured). Tap Sign In.
2 After you unpair a SoundStructure system, tap the SoundStructure Pairing tab.
3 Tap the Recently Paired tab to view a list of previously paired SoundStructure systems.
4 In the list, tap the desired SoundStructure system.
5 If Authenticated Pairing is selected, type a password for the SoundStructure system.
6 Tap Pair.
The Call screen is displayed.
Unpair a RealPresence Touch from a SoundStructure System
You must unpair the RealPresence Touch device from the Polycom SoundStructure system before you can
pair another system to the device.
To unpair the RealPresence Touch from a SoundStructure system:
1 From the Home screen, tap Settings > Administration and enter your Admin ID and password. Tap
Sign In.
2 Tap Unpair and Return to Pairing Screen.
Placing Calls on the RealPresence Touch
For information on placing calls and using the RealPresence Touch device, refer to the Polycom
RealPresence Group Series User Guide at support.polycom.com.
Use the RealPresence Touch to Generate Touch Tones
in a SoundStructure Call
In some environments, you need to use touch tones. You can generate (DTMF) touch tones in a call easily.
To generate touch tones:
» In a call, tap the desired numbers for the touch tones.
Polycom, Inc.
®
Using the Polycom
RealPresence Touch
™
with a SoundStructure System
282