Soundstructure Log Information - Polycom SoundStructure C16 Design Manual

Exported SoundStructure VoIP Interface Settings
Export Configuration File
Local
Web
Device Settings
To export a configuration, choose the type of export and click Export. If you are interested in exporting the
line registration information, you will want to select the Config File option.

SoundStructure Log Information

You can get the SoundStructure logs from the Wiring page within SoundStructure Studio.
If the SoundStructure VoIP Interface is detected in a system, the boot section of the logs will show that a
card was detected and in which SoundStructure system the card was found. An example of this is shown
next.
Sept 2 05:25:11 dsploader: sts: Detected plug-in card type: VOIP
...
Sept 2 05:25:36 gcp: sts: discovered 1 devices
Sept 2 05:25:36 gcp: sts: 1: c16 [voip ]
Jul 28 05:25:36 gcp: sts: starting global command processor
Jul 28 05:25:37 lcp: sts: waiting for VoIP plug-in card to boot
Jul 28 05:25:38 gcp: sts: parsed 273 parameter definitions from
/usr/share/serendipity/params.xml
Jul 28 05:25:38 gcp: sts: parsed 24 meter definitions from
/usr/share/serendipity/meters.xml
Jul 28 05:25:38 gcp: sts: connected 24 meter handlers
Jul 28 05:25:38 gcp: sts: connected 118 RAF-mapped parameters from
/usr/share/serendipity/rafmap.xml
Jul 28 05:25:38 gcp: sts: connected 0 dummy parameters
Jul 28 05:25:40 lcp: sts: VoIP plug-in card booted successfully
At the end of the SoundStructure system log there will be a summary (shown next) of the SoundStructure
information and the SoundStructure VoIP Interface settings.
========================================
============== system info =============
========================================
sys_name: SoundStructure System
sys_num_devs: 1
dev_bus_id
Polycom, Inc.
Description
Exports parameters that were configured on the phone's local user
interface. This is not relevant to the SoundStructure VoIP Interface.
Exports parameters setup in the Web Configuration Utility including codec
priorities and other changes from the default configuration exclusive of line
registration information.
Exports the parameters associated with the device including DHCP
options, provisioning server authentication settings, and more.
1
377