Polycom SoundStructure C16 Design Manual page 255

Step 2: Create events for both the split and combined mode
The next step is to determine how the logic switch operates – when the switch circuit is closed are the rooms
split or combined? This information determines which preset is called when the switch is open and when
the switch is closed. Assuming that the split preset is required when the switch is closed, the following Split
Mode and Combine Mode events should be created.
After adding these two events, the event page shows both events. From the events page is it easy to see
that when the switch is closed the split preset are run and when the switch is open the combined preset is
Polycom, Inc. 255