Polycom Touch Control Administrative Settings - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

6 Once the system pairs successfully, the Polycom Touch Control will display a successful pairing

screen as shown in the following figure.

If the network connection is lost for any reason, the Polycom Touch Control device automatically

attempts to restore the connection.

If the connection is lost the Polycom Touch Control will show a banner across the top of the screen that

indicates the connection to the SoundStructure has been temporarily lost as shown in the following

figure. If this message appears, then check that there is a valid network connection between the

Polycom Touch Control and that the SoundStructure is powered on.

Polycom Touch Control Administrative Settings

The Polycom Touch Control device has separate administration settings that allow for updating the Polycom

Touch Control software and configuring LAN, regional, and security properties for the Polycom Touch

Polycom, Inc.