Editing Default Wiring in SoundStructure Studio
When a virtual channel is moved, SoundStructure Studio redefines the virtual channel to use the new
physical inputs or outputs that are specified. Moving a virtual channel does not create any visible changes
in the Matrix or Channels page because SoundStructure Studio operates at the level of the virtual channel
and not the physical channels. The only page that displays a difference is the Wiring page.
It is important to know that the actual wiring of the system needs to match the wiring specified on the Wiring
page. Otherwise, the system does not operate as expected. For instance, in the example above, if the
recording output is physically plugged into output 3 when SoundStructure Studio notices the recording
Polycom, Inc.
82