Polycom SoundStructure C16 Design Manual page 329

Note: SoundStructure VoIP Interface Network Supporting RTP Packets
If you have a valid IP address for the SoundStructure VoIP Interface but can't
browse into the interface with the Web Configuration Utility and can't network ping
the interface, it is possible you have a network route to the interface that only
supports RTP packets. Contact your network administrator to create a network
route from your data network to your VoIP network that will allow you to configure
the SoundStructure VoIP Interface.
Once you have a valid IP address for the SoundStructure VoIP Interface and have access to that particular
network, you may customize the settings using the Web Configuration Utility.
The Web Configuration Utility has context sensitive Field Help information that displays on the right side of
the web page and provides detailed information on the parameter settings.
Web Configuration Utility login
Either click the Web Configuration button to open the default browser on the PC or enter the IP address of
the SoundStructure VoIP Interface into your browser to start the Web Configuration Utility.
Once your browser window is opened, you will be presented with a login prompt as shown in the following
figure. Select Admin and use the default password of 456.
Web Configuration Utility
Once logged in, you are presented with a series of settings including the model number, part number, MAC
address, IP address, UC Software version, and Updater software version as shown next.
Polycom, Inc. 329