Registering Lines With The Soundstructure Voip Interface - Polycom SoundStructure C16 Design Manual

DHCP Boot Server Settings
Name Possible Values
Option 60 Format RFC3925 binary
ASCII string
To save the settings select the save button on the bottom of the screen. Your changes may be viewed by
selecting View Modifications prior to selecting Save.

Registering Lines with the SoundStructure VoIP Interface

To register one or more lines of the SoundStructure VoIP Interface with the call management platform, you
need to supply the IT/Phone system administrator with the MAC address of the SoundStructure VoIP
Interface and in return the IT/Phone system administrator will provide the SIP server IP address and line
registration information including login credentials required to register with to the SIP server.
You can locate the MAC address on the rear of the SoundStructure VoIP Interface as shown next. In this
example, the MAC address is 0004F2BF001D.
SoundStructure VoIP Interface MAC Address
Polycom, Inc.
Description
Vendor identifying information in the format defined in RFC 3925
which can be found at:
Vendor-Identifying Vendor Options for Dynamic Host
Configuration Protocol version 4.
For more information, refer to
Using DHCP Vendor Identifying Options With Polycom
Phones.
Note: DHCP option 125 containing the RFC 3295
formatted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is ignored.
Vendor identifying information in ASCII.
Note: DHCP option 125 containing the RFC 3295
formatted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is interpreted as encapsulated
DHCP options and these will take precedence over options
received outside of option 43.
Technical Bulletin 54041:
339