Using The Polycom Realpresence Touch With A Soundstructure System; Setting Up And Enabling The Realpresence Touch; Pairing The Realpresence Touch Device With A Soundstructure System - Polycom SoundStructure C16 Design Manual

Using the Polycom
™
Touch with a SoundStructure System
®
The Polycom RealPresence Touch™ is a touch interface for Polycom solutions. You can pair the device to
your Polycom SoundStructure system. The following topics provide information on how to use the
RealPresence Touch with a Polycom SoundStructure system:
●

Setting Up and Enabling the RealPresence Touch

●

Pairing the RealPresence Touch Device with a SoundStructure System

●
Placing Calls on the RealPresence Touch
●
Use the RealPresence Touch to Generate Touch Tones in a SoundStructure Call
●
Use the RealPresence Touch to Generate a Flash Hook Command
Setting Up and Enabling the RealPresence Touch
For information on setting up and enabling the RealPresence Touch, refer to the Polycom Touch Devices
chapter in the Polycom RealPresence Group Series Administrator Guide at support.polycom.com.
Pairing the RealPresence Touch Device with a
SoundStructure System
You can pair the RealPresence Touch device with a SoundStructure system to control and configure audio
conference calls.
Pair a RealPresence Touch to a SoundStructure System for the First Time
You must pair the RealPresence Touch device to the Polycom SoundStructure system before you can use
the device to control the SoundStructure system.
To pair the RealPresence Touch with a SoundStructure system for the first time:
1 Tap Pairing, select SoundStructure and tap Save.
2 Tap the Manually Pair tab.
3 At Device Address, enter the SoundStructure system IP address.
4 If Authenticated Pairing is selected, type a password for the SoundStructure system.
5 Tap Pair.
The Call screen is displayed.
Polycom, Inc.
®
RealPresence
281