®
Integrating the Polycom
Touch Control
with SoundStructure Systems
®
This chapter describes how to integrate the Polycom
Touch Control with a SoundStructure system. For
information about using the Polycom Touch Control with a Video Codec system, see the
Polycom HDX
Systems Administrator's
Guide.
Polycom Touch Control and SoundStructure Systems
The Polycom Touch Control is an easy-to-use touch sensitive user-interface device that integrates directly
with a SoundStructure system for control of the audio conferencing system including dialing SoundStructure
telephony interfaces, muting audio, and adjusting volume. SoundStructure events are used to customize the
behavior when muting and adjusting volume.
The Polycom Touch Control can also integrate directly with a Polycom Video Codec system. When con-
trolling an Video Codec system, a SoundStructure system connected to the Video Codec system over
Conference Link2 will be controlled indirectly via the Conference Link2 integration. See
Connecting Over
Conference Link2
for additional information about Conference Link2.
SoundStructure System Requirements
SoundStructure Firmware
To use the Polycom Touch Control with the SoundStructure system that includes TEL1 or TEL2 telephony
interface cards, the SoundStructure system must have firmware version 1.3.3 or later.
To use the Polycom Touch Control with a SoundStructure system that includes the SoundStructure VoIP
Interface, the SoundStructure system must have firmware version 1.5.0 or later.
SoundStructure Studio
To use the Polycom Touch Control with the SoundStructure system, the SoundStructure Studio version must
be 1.5.0 or later. As described in this chapter, SoundStructure Studio 1.5.0 automatically creates the nec-
essary events for integrating the Polycom Touch Control with the SoundStructure system.
Polycom Touch Control
To use the Polycom Touch Control with the SoundStructure VoIP Interface, the Polycom Touch Control soft-
ware must be version 1.4.0 or later.
Polycom, Inc.
284