Customizing Soundstructure Telephony Settings - Polycom SoundStructure C16 Design Manual

UI Elements
Control
Audio Settings
Dial pad
Phone onhook/offhook
Dialed digits
Notifications Tab

Customizing SoundStructure Telephony Settings

You can use the telephony settings to customize the behavior of the SoundStructure VoIP Interface with the
following options.
Telephony Settings
Name
Auto Answer
Entry Tone
Exit Tone
Ring Tone
Polycom, Inc.
Description
The audio settings allow an integrator to customize the in-room behavior of the
SoundStructure VoIP Interface with auto answer, auto hangup, and ringtone
selection.
The dial pad allows the integrator to dial digits to make a call to test the system.
Indicates whether the call is offhook (phone_connect = 1) or onhook
(phone_connect = 0).
Displays the dialed digits for the current call.
Displays urgent messages about the VoIP interface's settings.
Possible Values
Enable or
Disable (default)
Enable (default) or
Disable
Enable (default) or
Disable
1 Normal ring (default)
2 Low trill
3 Low double trill
4 Medium trill
5 Medium double trill
6 High trill
7 High double trill
8 Highest trill
9 Highest double trill
10 Beeble
11 Triplet
12 Ring splash
13 Low trill precedence
14 Silent
Description
Enables or disables answering the phone automatically after
the second ring.
Determines whether the system plays a tone when the
phone is auto answered.
Determines whether the system plays a tone when the
phone auto hangs up after the remote caller hangs up.
Customizes the default ringtone to one of 14 values. The
default ringtone corresponds to the Default Ringtone in the
Web Configuration Utility under Preferences > Ringtones >
Default Ringtone.
You can further customize the ringtone for an individual line
from the Web Configuration Utility under Settings > Lines >
Line 1 > Ring Type. The default value for the Ring Type is
to use the Default Ringtone setting from Preferences >
Ringtones
347