How To Read This Chapter; Soundstructure Voip Interface Overview - Polycom SoundStructure C16 Design Manual

1 Create a SoundStructure Studio project with the SoundStructure VoIP Interface by creating a new
project or upgrading an existing project.
2 Install the SoundStructure VoIP Interface plug-in card into the SoundStructure system.
3 Give the MAC address of the SoundStructure VoIP Interface to the IT/Phone team and receive the
SIP server IP address and VoIP phone line registration information.
4 Enter the SoundStructure VoIP Interface the SIP server IP address and line registration information
from the Web UI of the SoundStructure VoIP Interface
5 Make a test call to confirm the line is properly registered to the SIP server.
The rest of the chapter explains these step in detail.

How to Read This Chapter

Use the following table to decide which section will help you.
Chapter Topics
If you...
Have an existing system with a TEL1 or TEL2 and want to
upgrade to a SoundStructure VoIP Interface
Want to create a new project with a SoundStructure VoIP
Interface
Want to dial a call or change the phone settings using
SoundStructure Studio
Need to configure a SoundStructure VoIP Interface to work
with a SIP call platform.
Want to validate your installation of the SoundStructure
VoIP Interface
Update the software on your SoundStructure VoIP
Interface
Want to see the new API commands and examples
Want to learn more about administration of VoIP systems

SoundStructure VoIP Interface Overview

The SoundStructure VoIP interface is a plug-in card designed for use with the rear panel slot available on
all SoundStructure devices. One SoundStructure VoIP Interface may be used per SoundStructure device. If
Polycom, Inc.
Then see...
Upgrading an Existing TEL1/TEL2 Project to the
SoundStructure VoIP Interface
Creating a New Project with the SoundStructure
VoIP interface
Using the SoundStructure VoIP Interface with
SoundStructure Studio
Configuring the SoundStructure VoIP Interface
Validating a SoundStructure VoIP Interface
Installation
Updating Software on the SoundStructure VoIP
Interface
Understanding SoundStructure VoIP Interface API
Commands
Polycom UC Software Administrators Guide 4.0.1
306