Creating A New Project With The Soundstructure Voip Interface - Polycom SoundStructure C16 Design Manual

3 Decide to continue to work offline or send the project to an online SoundStructure system. Polycom
recommends you continue to work offline.
4 Click Finish to create the updated project with the new plug-in cards that you selected in the
process. The project file may now be customized further if needed before sending to the
SoundStructure system.
At this point, you have created an offline project that includes the SoundStructure VoIP Interface.
Configuration of the SoundStructure VoIP Interface settings will be described in
SoundStructure VoIP Interface.

Creating a New Project with the SoundStructure VoIP interface

While the previous section focuses on converting an existing project, this section focuses on creating a new
project with the SoundStructure VoIP Interface.
To create a new project, follow these steps.
1 Launch SoundStructure Studio, select the File menu, and then select New Project.
Polycom, Inc.
Configuring the
316